Creative Engineers

Enquiry Us: 09 766 653 403

Products / Disc Spring


      

Disc spring are conically formed annular discs, which are loaded in the axial direction. Disc Springs offer a well-developed solution to many engineering problems through a unique combination of high force in a small space. Disc Springs can be used as single disc or arranged in stacks. A springs stack can consists of either single springs or parallel spring sets, Disc Springs are available with or without contact flats. Disc Springs are available with or without contact flats. Disc Springs are Belleville Washers are manufactured to DIN 2093 and DIN 6796. Heavy series Disc Springs are manufactured from forgings. We have computerized design program to assist our customers for their specific applications. Disc Springs are mainly manufactured from 50CrV4 material.

ADVANTAGES OF DISC SPRINGS

  1. No Deformation of Fatigue under normal loads.
  2. High Energy Storage Capacity.
  3. Long Service Life.
  4. Stock Keeping is minimized as the individual spring sizes can be combined university.
  5. Space saving.
  6. Largely Self-damping, giving good shock absorption and energy dissipation.
  7. Efficient use of space and high spring force with small deflection.
  8. Adaptable to stacking in numerous configurations, Thus having modular spring element.
  9. Low cost & Greater Security.

Disc Spring Stack length

When stacking Disc Springs, effort should be made to keep the stacks as short as possible. Friction and other influences make a stack more uneven. It influences more on the side of the loading. This effect usually can be neglected for a "normal" spring stack, but not for long stacks. If it is longer, the stack can be stabilized by dividing it with guide washes, which as a rule of thumb should have a thickness of at least one and a half times the guide diameter.

X

Send Email Enquiry

verification image, type it in the box